3
4-2 Display section
①
7-segment LCD
: displays the measured value
②
Low battery mark : will blink when battery power is insufficient.
5. How to Use
5-1. Loading Batteries
When the low battery mark blinks, replace the batteries with new ones with the
following procedure.
(1) Rotate the screw on the battery lid on the back of the main unit counterclockwise using
a Philippe screwdriver until it comes free and then remove the battery lid.
(2) Load four AAA batteries so that each positive or negative terminal faces the correct
direction.
(3) Reinstall the battery lid and secure with the screw in the reverse order of the removal
procedure. If you have a torque driver, firmly secure with about 0.40 (N.m). Otherwise,
Waterproofness will not be guaranteed.
Warning
* When the low battery mark blinks, replace the batteries with new ones. Otherwise,
measured value may display incorrectly.
* Replace all four batteries with new batteries of the same type.
* Do not dispose the used battery into a fire.
* Dispose the used battery according to your local rules and regulations.
