Satel SATELLINE-M3-R3, Руководство пользователя

Страница: 28 / 32

SATELLINE-M3-R3
Integration Guide, Version 1.6
27
7 APPENDIX
7.1 SL-COMMANDS
Category Command Description Response
Addressing SL#A? Show all addresses (RX1, RX2, TX1, TX2) "xxxx,yyyy,zzzz,vvvv"
Addressing SL#A=xxxx,
yyyy, zzzz, vvvv Set RX/TX addresses (RX1, RX2, TX1, TX2) "OK" or "ERROR"
Addressing SL#I? Get primary addresses (TX1, RX1) "xxxx;yyyy"
Addressing SL#I=xxxx Set all addresses (RX1, RX2, TX1, TX2) to value
xxxx [0000....ffff] "OK" or "ERROR"
Addressing SL#P? Get primary transmit address (TX1) and primary
receive address (RX1) "xxxx;yyyy"
Addressing SL#P=xxxx;yyyy Set primary transmit address (TX1) to value xxxx
and primary receive address
(RX1) to value yyyy [0000....ffff]
"OK" or "ERROR"
Addressing SL#Q? Get TX address mode "0" = TX address OFF
"1" = TX address ON
Addressing SL#Q=x Set TX address ON/OFF. Values of x are:
"0" = TX address OFF
"1" = TX address ON "OK" or "ERROR"
Addressing SL#R? Get primary receive address (RX1) "yyyy"
Addressing SL#R=xxxx Set receive addresses (RX1, RX2) to value xxxx
[0000....ffff] "OK" or "ERROR"
Addressing SL#S? Get secondary transmit address (TX2) and
secondary receive address (RX2) "xxxx;yyyy"
Addressing SL#S=xxxx;yyyy Set secondary transmit address (TX2) to value
xxxx and
secondary receive address (RX2) to value yyyy
[0000....ffff]
"OK" or "ERROR"
Addressing SL#T? Get primary transmit address (TX1) "xxxx"
Addressing SL#T=xxxx Set transmit addresses (TX1, TX2) to value xxxx
[0000....ffff] "OK" or "ERROR"
Addressing SL#W? Get RX address mode "0" = RX address OFF
"1" = RX address ON
Addressing SL#W=x Set RX address ON/OFF. Values of x are:
"0" = RX address OFF
"1" = RX address ON
"OK" or "ERROR"
ChannelList SL$A=1 Go to channel list default channel "OK" or "ERROR"
ChannelList SL$D? Get channel list default channel number decimal number
ChannelList SL$D=n Set channel list default channel, n is channel
number "OK" or "ERROR"
ChannelList SL$E=1 Search free channel
Module searches for next traffic-free channel.
Listening time of traffic
is about 2 seconds
Module shows next free channel by activating
command again
"OK" followed by “channel
n is free”
Value of n is channel
number of next free
channel on channel list