8 User
Manual
SATEL
If the installer has enabled the G
RADE
3
option:
the
LEDs provide information about alarms only after the code has been
entered and confirmed with the
key,
blinking of the
LED means that there is a trouble in the system, some zones
are bypassed, or that there was an alarm.
5.1.3 Keys
The keys designated with digits and letters enable entering the code and data, when using
the functions available in the menu. Additionally, if you press and hold down the selected digit
keys for approx. 3 seconds, you can (if the keypad has been so configured by the installer):
1
- check the state of zones,
4
- check the state of partitions,
5
- view the alarm log,
6
- view the trouble log,
7
- view the current troubles,
8
- turn on/off CHIME in the keypad,
9
- toggle the display between the standby mode and partition state display mode.
The other keys enable you to:
- enter the user menu (after entering the code),
- cancel the started operation.
or
- arm / disarm and clear alarm (after entering the code),
- start the selected function,
- confirm the entered data.
- navigate through the display (scroll through the displayed messages, functions
and options, and move the cursor),
- run the installer selected functions (after entering the code).
- trigger the fire alarm.
- trigger the medical (auxiliary) alarm.
- trigger the panic alarm.
5.1.4 Built-in proximity card reader
The INT-KLCDR and INT-KLFR keypads can be operated by means of proximity cards
(proximity tags or other 125 kHz passive transponders). The installer defines which functions
can be executed after presenting or holding the card.
5.1.5 Sound signaling
Beeps generated when operating
The installer can disable the sound signaling.
1 short beep
– pressing any number key.
2 short beeps
– confirmation of command execution, signaling of entering the user menu,
submenu or function.
