Satel INTEGRA INT-TSH2 Скачать руководство пользователя страница 28

Страница: 28 / 36

INT-TSH2

SATEL

Fig. 12. “Tests” screen (example).

GPRS monit.test

– tap to send a test transmission to the monitoring station via cellular data

network. When sending the transmission, messages on the display provide information on
the currently performed operation.

Messaging test

– tap to test the telephone messaging (see “Messaging test” p. 27).

Answering test

– tap to test the answering phone calls by the control panel (information on

the number of rings and going off-hook will be displayed).

CA-64 PTSA test

– tap to test the mimic board.

View masters

– tap to check in which objects the master users are created.

Keypad name

– tap to see the keypad name.

File in DLOADX

– tap to see the date and time of writing the data to the control panel by

means of the DLOADX program and the name of file with control panel data.

Panel version

– tap to display information on the control panel firmware version.

STM prg.version

– tap to display information on the program version of the processor used

to operate the zones / ABAX system.

GSM IMEI/v/sig.

– tap to display the information on the level of GSM signal, IMEI number

and version of the telephone. The function available in the INTEGRA 128-WRL control
panel.

IP/MAC/IMEI/ID

– tap to display the information related to the ETHM-1 Plus / ETHM-1 /

INT-GSM modules.

Modules versions

– tap to display the information on the firmware versions of devices

connected to the control panel communication buses.

Burglary zones

– tap to test the burglary zones (see “Burglary / fire / technical zone test”

p. 27).

Fire/tech. zones

– tap to test the fire and technical zones (see “Burglary / fire / technical

zone test” p. 27).

One zone

– tap to test the selected zone (see “Selected zone test” p. 27).

Finish test

– tap to end the zone test.

View results

– tap to see the zone test results (see “Review of test results” p. 28).

Clear results

– tap to clear the zone test results.

Содержание INTEGRA INT-TSH2





































Результаты поиска

Содержание INTEGRA INT-TSH2

Отзывы:

Похожие инструкции для INTEGRA INT-TSH2

Бренды по названию

Популярные бренды

Satel INTEGRA INT-TSH2, Руководство пользователя

Результаты поиска

Содержание INTEGRA INT-TSH2

Отзывы:

Похожие инструкции для INTEGRA INT-TSH2

Бренды по названию

Популярные бренды