SATEL
INT-TSH2
17
Fig. 9. “Partitions” screen (example).
The icons in the top right corner allow you to:
tap to clear alarm.
tap to terminate the exit delay countdown (function available if the installer enabled
the exit delay clearing).
tap to filter the partition list (see “Filtering the partition list” p. 20).
tap to search for partition/partitions (see “Searching for partitions” p. 20).
tap to go back to the user menu home screen.
The icon displayed in front of the object name allows you to:
tap to hide the list of partitions that belong to the object.
tap to show the list of partitions that belong to the object.
Information about how many partitions are selected is shown in brackets next to the partition
name ([number of selected partitions]/[number of partitions]).
The numbers displayed next to the following icons indicate:
number of disarmed partitions.
number of armed partitions.
number of partitions where alarm condition occurs.
number of partitions where exit delay is running.
number of partitions where the first code has been entered (the partition is armed /
disarmed using two codes).
If you tap the screen close to the bottom edge and swipe up, the buttons with the icons will
appear at the bottom of the screen:
tap to increase the size of the icons/names on the list.
