18
INT-TSH2
SATEL
tap to decrease the size of the icons/names on the list.
tap to hide the partition names on the list.
tap to display the partition names on the list.
tap to hide the buttons.
10.4.1
Arming
1. Tap the partition you want to arm. The button with the
icon will appear at the bottom of
the screen (if the button with the
icon will appear, it means that the partition is armed
using two codes – see “Two-code arming”).
2. If you want to arm several partitions, tap each partition one by one.
3. Tap the button with the
icon. The buttons with available arming modes will appear.
4. Tap the button with the arming mode you want to activate.
5. Tap the button with the
icon. The arming procedure will start.
10.4.2
Two-code arming
When two users are required in order to arm a partition, follow these steps:
1. Tap the partition you want to arm. The button with the
icon will appear at the bottom of
the screen.
2. If you want to arm several partitions that require 2 codes for arming, tap each partition
one by one.
3. Tap the button with the
icon. The buttons and the slider will appear at the bottom of
the screen.
4. If the installer did not set the code validity time to 30 seconds, you can set the code
expiration time using the slider.
5. Tap the button with the
icon.
6. Ask another user to arm the partition. The same keypad (see “Arming”) or another keypad
can be used for this purpose as well as a partition keypad or a proximity card reader.
The installer can configure the alarm system so that the same keypad cannot be used
to enter the second code.
10.4.3
Disarming
1. Tap the partition you want to disarm. The button with the
icon will appear at the
bottom of the screen (if the button with the
icon will appear, it means that the partition
is disarmed using two codes – see “Two-code disarming”).
2. If you want to disarm several partitions, tap each partition one by one.
3. Tap the button with the
icon.
If there was an alarm condition in the partition, disarming will clear the alarm.
