10 INT-KWRL
SATEL
Additional options
Silent PANIC alarm
[Silent panic] – if this option is enabled, the panic alarm triggered from
the keypad will be a silent one (without loud signal).
Sign. alarms
[Alarm signal.] – if this option is enabled, the keypad will signal the alarms
audibly.
Key sounds
[Key sound] – if this option is enabled, pressing the keypad keys is confirmed
by beeps.
Sign. trbl. in part. arm
[Trbl.in p.arm.] – if this option is enabled, the
LED goes off after
all managed by keypad partitions are armed (if the option is disabled, the LED goes off
after just one of the partitions is armed).
Sign. new trouble
[New trbl.sign.] – if this option is enabled, the keypad can audibly signal
the occurrence of a new trouble (if the T
ROUBLE MEMORY UNTIL REVIEW
option is enabled).
New trouble signaling is cleared after the troubles have been reviewed by the user.
Show code entering
[Show code ent.] – if this option is enabled, entering the code is
presented on the keypad display by asterisks.
Show keypad name
[Name (2nd row)] – if this option is enabled, the keypad name is
presented in the lower line of the display.
Exit delay clearing enable
[Fin.exit delay] – if this option is enabled, the exit delay time in
partitions with the E
XIT DELAY CLEARING
option enabled can be shortened after pressing in
turn the
keys.
Show viol. zones
[Zone violation] – if this option is enabled, violating the CHIME signal
triggering zone result additionally in the zone name being displayed in the active mode.
Auto-Arm delay countdown
[Auto-arm delay] – if this option is enabled, the auto-arm delay
countdown in partition is indicated by beeps.
Show disarm messages
[Show disarming] – if this option is enabled, the keypad displays
the disarming message irrespective of how the system has been disarmed. If this option is
disabled, the keypad displays the disarming message only when the system has been
disarmed from this keypad.
Show arm messages
[Show arm] – if this option is enabled, the keypad displays the arming
message. If the option is disabled, the arming message is not displayed.
Quick control
[Control (8#)] – if this option is enabled, the O
UTS CONTROL
user function can
be started by pressing in turn the
keys (without the need to enter the user
code).
Tamper signaled in part.
[Tamper in part.] – partition where alarm will be triggered in the
event of keypad tamper, triggering the alarm from keypad etc.
