12 INT-KWRL
SATEL
12 INT-KWRL
SATEL
8 – chime on/off
[Chime changing] – if this option is enabled, the user can switch on/off the
CHIME signal in the keypad by pressing and holding for 3 seconds the
key.
Fig. 7. DLOADX
program: keypad settings stored in the control panel – “State inspections”
tab.
state [Part.characters]
to illustrate the state of partitions on the
lected. The partitions are displayed successively: for
, 6 and 7 are selected, their state will be displayed in the first,
Us
Code+[arrow]
[Code+arrows] – you can define which functions will be started on entering
the code and pressing the selected arrow key.
Zone state [Zone characters]
You can define the symbols which will be used to illustrate the state of zones on the display.
Partition
You can define the symbols which will be used
display.
Permanently displayed partitions [State part.]
You can select the partitions whose state will be permanently presented in the lower line of
the display. Up to 16 partitions can be se
example, if the partitions 3
second and third position of the display.
er functions definition
