manualshive.com logo in svg

Satec 3100 Series, Руководство пользователя

Поделиться
Скачать
Satec 3100 Series Скачать руководство пользователя страница 9

PP3123-03-0101

Series 3100

User’s Guide

Automatic Burst Test Systems

SATEC PIPE & PRESSURE

9

WARNING!

Shut down the hydrostatic/burst power supply and discharge pressure
before disconnecting any fluid coupling.

Do not disconnect any coupling without first shutting down the hydrostatic
power supply and discharging stored pressure to zero.  Tie down or
otherwise secure all pressurized hoses to prevent movement during
system operation and to prevent the hose from whipping about in the
event of a rupture.

WARNING!

Disconnect the air pressure supply prior to shutting off electric.  Possible
pressure could be released.

WARNING!

Disconnect the electrical power supply before attempting to disassemble,
inspect, or clean the system.

WARNING!

Disconnect the electrical power supply before removing the covers to
electrical equipment.

Disconnect equipment from the electrical power supply before removing
any electrical safety covers or replacing fuses.  Do not reconnect the
power source while the covers are removed.  Refit covers as soon as
possible.

WARNING!

Shut off electrical power before servicing or making any adjustments
inside the cabinet.

WARNING!

Take care when installing or removing a specimen.

Installation or removal of a specimen involves working with high pressures
and possibly high temperatures.

Содержание 3100 Series
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды