PP3123-03-0101
Series 3100
User’s Guide
Automatic Burst Test Systems
SATEC PIPE & PRESSURE
19
C
ONTROLS
System Supply Panel
Figure 1: System Controls.
System Pressure
Gauge:
This pressure gauge (1,
Figure 1
) indicates the pressure
(psi) available in the accumulator. The maximum range
displayed on this gauge is the maximum range of the
system.
Burst Supply
ON/OFF Valve:
This is the main shut-off valve (2) for the system. When
in the OFF position, the water supply is shut-off from the
cabinet.
Main Power
Circuit Breaker
and Indicator:
The main power circuit breaker (3) is a Ground Fault
Interrupt type (GFI) and controls all of the electrical
power to the burst test cabinet. The power indicator (4)
will illuminate to show a power ON condition.
1
3
4
1.
System Pressure Gauge
2.
Burst Supply ON/OFF Valve
3.
Main Power Circuit Breaker
4.
Main Power Indicator
2
