28
Pressing the volume up button will increase the volume of the SATcase speaker.
Pressing the volume down button will decrease the volume of the SATcase speaker.
Pressing the mute button will mute the sound coming from the SATcase speaker until pressed
again to activate sound.
b)
Keypad LED indicators
SOS activation
When the SOS function is activated (from the back of the SATcase), the SOS LED will blink
repeatedly on the keypad.
The SOS LED turns off when SOS has been deactivated.
Call activation
When a call is activated or at calling tone stage, the call LED will light up on the keypad.
The call LED will turn off when the call has ended or failed.
Battery levels
The battery level LED is a bi-LED so will switch between green and red to indicate battery
levels (2.4e – ‘Checking battery charge level’ will instruct how to understand colour signals).
Signal levels
When using SATcase without the APP, little or no satellite signal strength is indicated when
the ‘weak signal strength’ LED lights up on the keypad.
Medium satellite signal strength is indicated when the ‘med signal strength’ LED lights up on
the keypad.
Strong satellite signal strength or full signal is indicated when the ‘strong signal strength’
LED lights up on the keypad.
When using the APP with the SATcase, the APP will notify the satellite signal levels.
Power on/off
When the SATcase is turned on, the power LED will light up constantly.
The power LED will turned off when the SATcase is turned off.
c)
SATcase SOS button
Below is the SOS cover, located on the back of the SATcase:
To send a distress signal to the Search and Rescue services from the SATcase itself, the user
must slide the SOS cover down and the uncovered SOS button must then be held for 3
seconds. The SATcase does not have to have satellite signal nor does the antenna need to be
extended, for the distress signal to activate.
To confirm the SOS is active, the SATcase SOS LED on the keypad will blink repetitively
and vibrate the SATcase for 15 seconds.
