SATA SATAJET 3000 K RP/HVLP, Руководство по эксплуатации

Страница: 43 / 134

43
EN
Operating instructions SATAjet 3000 K spray mix Operating instructions SATAjet 3000 K spray mix
10.7. Replace material sieve
Warning!
Risk of injuries from components coming loose or leaking
material.
Operation of the spray gun without a material sieve will lead to loss of
the sealing function.
→ Only use the spray gun when the material sieve is inserted.
Remove the material sieve
■ Unscrew material filter housing [16-3] using SATA universal spanner
(size 19). Hold with open-end spanner (size 14) at threaded part [16-1] .
■ Remove material strainer [16-2] .
Fit new material sieve
■ Insert material strainer
[16-2]
in material filter housing
[16-3]
.
■ Screw material filter housing on and hand-tighten with SATA universal
spanner (size 19). Hold with open-end spanner (size 14) at threaded
part [16-1] .
11. Care and storage
Careful handling, together with constant maintenance and care of the
product, is necessary to ensure the functioning of the spray gun.
■ Store the spray gun in a dry place.
■ Clean the spray gun thoroughly every time after it has been used and
every time before changing the material.
■ After cleaning, dry the complete spray gun with clean compressed air
and grease moving parts with SATA high performance grease (Art. No.
48173).