SATA SATAJET 3000 K RP/HVLP, Руководство по эксплуатации

Страница: 32 / 134

32
EN
Operating instructions SATAjet 3000 K spray mix
■ Never bring more solvent, paint, varnish or other dangerous materials
into the working environment of the spray gun than you need continue
working. Always move these materials to correct storage rooms after
work has finished.
Operating parameters
■ Only operate the spray gun within the parameters stated in the Techni-
cal Data.
Connected components
■ Only use original SATA accessories and spare parts.
■ The connected hoses and lines must reliably withstand the thermal,
chemical and mechanical loads expected during operation.
■ When pressurised hoses work loose, their whip-like movements can
cause injuries. Always vent the hoses completely before they are loos-
ened.
Cleaning
■ Never use acidic or alkaline cleaning agents to clean the spray gun.
■ Never use cleaning agents based on halogenated hydrocarbons.
Point of use
■ Never use the spray gun in the vicinity of ignition sources, such as
naked flames, burning cigarettes or non-explosion-proof electrical
equipment.
■ Only use the spray gun in well ventilated rooms.
4. Use
Intended Use
The spray gun is used for pickling, glazing and applying paints, lacquers
and other sprayable media to suitable substrates.
Incorrect use
Abrasive materials and materials containing acid and petrol may not be
processed.
5. Scope of Delivery
Art. No. 120 006
■ Spray gun without material nozzle
■ Paint pipe and material filter (100 msh)
■ Operating Instructions
Art. No. 120 014