Sartorius Arium H2O-ARST-P-B, Руководство по эксплуатации

Страница: 70 / 76

Technical Data
70 Arium
®
Smart Station Operating Instructions
Unit Value
Protection class according to IEC 62368-1 I
Power supply cable
Power supply cable according to IEC 60320-1 / C14:
Country-specific, 3-pin, two-sided plug
For further data, see label on the power supply unit
14.5.2 Power Consumption of the Dispensing Unit
Unit Value
Power consumption, typical W 32
Maximum current consumption at 24Vdc (± 10%) A 1.3
Fuse, cannot be changed electronically A 2.14
14.5.3 Safety and Electrical Compatibility
Safety according to IEC 61010-1 Safety requirements for electrical
equipment for measurement, control, and laboratory use – Part 1:
General requirements
Suitable for use in industrial areas (interference immunity)
Electromagnetic compatibility, according to EN 61326-1 Electrical
equipment for measurement, control, and laboratory use – EMC
requirements – Part 1: General requirements (IEC 61326-1)
Interference emission, class B
Class B: Suitable for use in residential areas and areas that are
connected to a low voltage network that also supplies residential
buildings.
14.6 Device Functions
Unit Value
Water type, according to the connected Arium
®
water
treatment device
Ultrapure water type 1 or pure water
type 2 and type 3
Inlet pressure, maximum bar 3.4
Volume-controlled dispensing l Between 0.05 and the maximum
tank content or 60 (in 50 ml
increments)
Inlet water temperature, maximum °C 40
Period of time before Eco mode starts Minutes 1
For “Pure” version: Period of time before device switches
to standby mode Minutes 15