Sartorius Arium H2O-ARST-P-B, Руководство по эксплуатации

Страница: 49 / 76

Operation
Arium
®
Smart Station Operating Instructions 49
7 Operation
7.1 Switching the Device On and Off
Procedure
t
To switch the device on: Connect the device to the power supply.
y
The device starts and performs a system check.
t
To switch the device off: Disconnect the power cable from the power
supply.
Ultrapure Water Quality
If the system is switched off in normal operation, e.g., in the evening or at
weekends, then consistent ultrapure water quality is
no longer guaranteed.
In order to ensure a consistent ultrapure water quality, we recommend
activating the standby mode on the Arium
®
water treatment device and all
connected dispensing units.
7.2 Dispensing Water
7.2.1 Preparing to Dispense Water
The water can be dispensed as follows:
− Manual dispensing
− Volume-controlled dispensing
When dispensing large volumes, the water can be dispensed via a dispense
tube, e.g. into a floor-standing tank. To do this, the final filter must be
removed.
Requirements
− The device is ready for operation (see Chapter “6 Getting Started”,
page 39).
− The device is in dispensing mode.
NOTICE
Water leakage due to vessel overflow!
t
Do not allow water to be dispensed unattended. The vessel being filled
may overflow.
t
To avoid dispensing volumes that are too large: Dispense the water in a
volume-controlled manner.