Copyright © 2018, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
05/31/18
A8239A• 800-810-WIRE (9473) • www.sargentlock.com
6
SE LP10 7000 Series Multi Point Lock
Gr
een (NC)
White (C)
3287 Door
Position Switch
12 Conductor
ElectroLynx Harness
From McKinney
SE LP10
QC12 Electric
Hinge From
McKinney
Lock body
Power Supply
(By Others)
READER NEG - Black, 1
READER POS - Red, 2
DATA 1 - White, 3
DATA 0 - Green, 4
RX (NO) - Orange, 5
RX (COM) - Blue, 6
*EGND- Brown, 7
TAMPER - Yellow, 8
LOCK NEG - Violet, 9
LOCK POS - Gray, 10
Input
120 VAC
Not Used
Black (Hot)
White (Neutral)
Green (Gnd)
H
N
G
12/24VDC
-
+
SE LP10
Requires 12VDC
(-)
(+)
12/24VDC
DATA 1
DPS
DPS
Use (NC) for
Fail Safe
Operation
(NO) Fail
Secure
Operation
Electronic
Access Control
Panel
(By Others)
Lock
Relay
DIAGRAM #1 – MODE 1: RED LED ‘ON’ WHEN POWERED
Standard Application Shown - For Alternative Applications Contact 1-800-810-WIRE (9473)
Reader Requires 5 to 16VDC Filtered and Regulated
*IMPORTANT: Pin 7 must be tied to earth ground in the access control panel.
Failure to follow proper ESD safe grounding procedures could lead to equipment failure.
DATA 0
RX (NO)
RX (COM)
Typical SE LP10 Application Diagram (12/24VDC System)
12VDC System / 24VDC System
• Reader Draw = 200mA@12VDC
• Actuator Draw = 1A inrush / 600mA during retraction / 250 mA maintained
in dogged position @ 24VDC
