Copyright © 2018, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
05/31/18
A8239A• 800-810-WIRE (9473) • www.sargentlock.com
16
SE LP10 7000 Series Multi Point Lock
Use SARGENT 3287 Concealed Door Position Switch with this product:
1. Concealed Door Position Switch Model 3287 is included with this product.
System integrator shall determine use and installation location.
2. If Sargent 3287 Concealed Door Position Switch installation is specified,
use SARGENT template A7448B to prepare door and frame at desired
location.
3. Connect the common wire of the switch to the common input
terminal of the EAC.
4. Connect the normally open wire of the switch to the normally
open input terminal of the EAC.
3287 Door
Position
Switch
McKinney
Electric
Hinge
Gr
een (NC)
White (C)
Wiegand Access
Control System
12VDC: Optional 24VDC
Lock Available
(Reader is always 12VDC)
Concealed Door Position Switch Instructions (3287)
8
8B Position Inside Escutcheon & Wires (ELR)
Fig. 8B (ELR)
1. Position escutcheon against door by
hooking the top edge on the top of the ELR
assembly. Verify that no wires are being pinched.
2. Mount inside escutcheon assembly to
plate using (1) #8-32 x 5/8" Phillips flat
head undercut machine screw (Figure 8B).
Machine
screw detail
