SARGENT & GREENLEAF
■
WWW.SARGENTANDGREENLEAF.COM
[t] 800.826.7652
■ 859.885.9411 ■
E-mail: (Information Required)
■
One Security Dr. Nicholasville, Kentucky 40356
S&G TOUCHLESS ADO.docx REV - 08/2021
8
8-
1/4
” Typ.
w/ 20mm
spindle
2-
1/4
"
DOOR
SWING
0" REVEAL
SECTION VIEW – PULL
(Aluminum & Glass Door – N.T.S)
1-½”
8" MAX REVEAL
DOOR
SWING
REINFORCEMENT
AS REQ’D (BY OTHERS)
SECTION VIEW – PUSH (N.T.S)
6-½” Typ.
w/ 35mm
spindle
2"
C
L
1"
HOUSING BACKPLATE INSTALLATION:
Mount the pre-drilled back-plate to the top door frame using appropriate fasteners for the type of frame.
(REFER TO DOOR PREP DRAWINGS ON PGS. 10-14.)
•
Standard Push side mounting: Pre-drilled back-plate is flush with bottom of door frame.
•
Standard Pull side mounting: Pre-drilled back-plate is mounted 1.5” up from bottom door frame.
•
For non-standard mounting, longer spindles are available. Consult factory for non-standard
applications
•
Refer to Page 14 for Double Egress applications.
•
Back-plate should overlap each jamb tube by 1.5”.
•
Refer to the APPENDIX for fire rated door applications.
PUSH-ARM APPLICATIONS
:
Bottom of operator header is flush with
bottom of top frame.
PULL ARM APPLICATIONS: Bottom of
operator is mounted 1.5” up from the
bottom side of top door frame
NOTE:
A 35 mm spindle adaptor is included with all
standard push arm applications. This
requires that the header assembly be
mounted as shown at left, flush with bottom of
frame face.
Содержание Touchless ADO
Страница 1: ......
