Sargent and Greenleaf Touchless ADO, Руководство по установке

Страница: 28 / 48

SARGENT & GREENLEAF ■ WWW.SARGENTANDGREENLEAF.COM
[t] 800.826.7652 ■ 859.885.9411 ■ E-mail: (Information Required) ■ One Security Dr. Nicholasville, Kentucky 40356
S&G TOUCHLESS ADO.docx REV - 08/2021 28
IMPORTANT
•
If the door closes against a fixed door stop that is door frame mounted, the CLOSED DOOR STOP
does NOT have to be adjusted to meet the stop-point screw. This step is optional.
•
The OPEN DOOR STOP setting is also optional. A "SOFT STOP" is sometimes preferred depending
upon the application, particularly if heavy manual use is anticipated. The Soft Stop is simply a
method of programming the door for the open position by means of a temporary stop method;
such has holding your foot at the desired location during programming. To use the Soft Stop
method, perform the following during the setup on Page 31:
o
During the first opening cycle, position your foot on the ground at the desired full
open door position.
Allow the door to open and hit your foot during the first opening cycle during
setup - you can then remove your foot from that position.
o
Allow the setup to complete itself thereafter
o
The door will open automatically thereafter to that position. When the door is
pushed further than the soft stop location it will return to the programmed point
automatically.
o
Do not use the soft stop method if there is anything behind the open door that
the door could be repeatedly pushed into from manual openings - such as a glass
wall.