Cup Strainer Cleaning
1. Turn power off to the spa
2. Remove equipment access panel.
3. Drain Spa
4. Locate care taker union in the equipment compartment.
5. Unthread union nut by turning counter clockwise.
6. Remove cup strainer and clean free of any debris.
7. Re-install cup strainer and align o-ring.
8. Thread union nut back together by turning nut clockwise.
Valve Cleaning
1. Turn power off to the spa
2. With a flat head screwdriver pry the cap off of the valve
3. Unthread valve cover by turning valve cover counter clockwise
4. Pull diverter up and clean any debris by wiping with a damp soft cloth
5. Re-insert diverter and twist until unit locks back into place, then realign o-rings
6. Thread valve cover back on by turning clockwise.
7. Snap valve cap back on to valve cover
Replacing the Spa’s Light Bulb
The spa’s light bulb is located inside of the equipment compartment. Remove the front
access panel, by first removing the screws on the access panel.Then locate the light housing
mounted to the spa shell. Grasp the bulb holder on the back of the light niche.Turn bulb
holder counter clockwise to release it from the light niche. Pull bulb out of receptacle and
replace it with a new GE 912 bulb. Re-attach the light bulb holder to the light niche by
turning the light bulb holder clockwise.
Note:
Colored lenses for the underwater mood light are an option.
Union Nut
Caretaker Union
O-Ring
Cup Strainer
48