§ Main Gear, Fixed (Optional)
T-45 Goshawk Composite
13
}}}}
Remove the covers and gear struts. Reinforce
the pilot holes with thin CA adhesive.
}}}}
Enlarge the holes in the gear covers to
accommodate the gear cover screws.
}}}}
Reassemble and dry fit in the wing, check for
and fix any clearance issues.
Bond Main Gear
Required Parts
o
o
o
o
Wing [W]
o
o
o
o
Main Gear Mount Assemblies (2) [W5]
Required Tools and Adhesives
®
®
®
®
12 Minute Epoxy Adhesive
}}}}
Disassemble the gear mount assemblies, you
will bond the gear mounts into the wing on their
own.
}}}}
Bond the completed main gear mounts using
Epoxy adhesive. The following picture shows the
places where Epoxy adhesive needs to be
applied.
Epoxy adhesive locations for main gear mounts
}}}}
You may need to temporarily insert the main
gear strut to guide the mount into its final
location.
}}}}
Before the Epoxy dries test fit the main gear
covers to make sure that there are no clearance
issues; if necessary make adjustments.