SSP Settings (RS-485)
Control Panel Displays for Equipment with SSP
1
INDIVIDUAL
Select this when operating the connected
devices individually.
2
GROUP
Select this when using a separate system
controller to make group settings.
3
CATEGORY
Use this to select the devices (example: CAM) to
be operated. When a CATEGORY is selected,
the “KEY” display also changes to the display for
the same unit (example: CAM).
•
You can then operate cameras that are
connected to the multiplexer. (Figure 1)
Figure 1
4
ADDRESS
Use this to select the addresses of the
connected devices.
5
KEY
Select this when operating a camera that is
connected to a multiplexer, for example when
CATEGORY is set to “MPX”.
At this time, the control panel changes to the
camera control panel, and the camera can then
be operated.
6
MULTI VIEW button
Click this button to close the SSP operating
screen. The display will return to the 4-screen
split screen.
7
POP UP button
This will be displayed when “CONTROL PANEL
DISPLAY” is set to “FIXED”. You can click this
button to display the control panel in a separate
window.
2
3
1
4
5
6
7
(CAM)
(MPX)
(VCR)
(DVR)
L8NAA/XE
(VSP-SV2000P) GB 2003,
5,
12
English
– 53 –
