Sanyo SANUPS A11J, Инструкция по эксплуатации

Страница: 42 / 52

Using Power Management Software
39
If the installation program does not start
automatically, double-click Setup.exe on the
CD-ROM to start installation manually.
§
1
1
2
2
.
.
U
U
s
s
i
i
n
n
g
g
P
P
o
o
w
w
e
e
r
r
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
S
S
o
o
f
f
t
t
w
w
a
a
r
r
e
e
Install and use the power management software on your computer.
For more information, see the
Installation Guide and User Guide
in the “PDF” folder on the CD-ROM.
①
Check that “Interface” in the LCD panel setting menu is set to “WS” (workstation).
The default setting is “WS” (workstation).
If the interface setting has been changed, set it to “WS” (workstation).
For the setting procedure, see §3.5 “Setting PC Interface” in the
LCD Panel Operating Manual
.
②
Connect the PC I/F connector on the back of the UPS to the computer with the supplied
communication cable.
③
Check that the connections of the communication cable are not loose.
④
Install the power management software “SANUPS SOFTWARE STANDALONE”.
The installation starts automatically when the CD-ROM is inserted.
Install the software as instructed on the screen.
⑤
After completing the software installation, reboot the computer.
⑥
Start “SANUPS SOFTWARE STANDALONE”, and configure the settings in the UPS connection
setting screen.
Connect the PC/WS side to the
RS-232C connector of the computer.
Connect the UPS side to the
PC I/F connector of the UPS.
This software is for managing the power supply with a computer by communicating between the UPS
and computer (personal computer, workstation, etc.).
What is power management software “SANUPS SOFTWARE STANDALONE” (supplied CD-ROM)?
For details on the PC I/F connector, see §5.4 “External Interfaces.” If the PC I/F connector is used,
a LAN interface card cannot be used at the same time.
Note
Computer system requirements
Computer: AT compatible
CPU: Pentium III 500 MHz or faster
Memory: Minimum of 32 MB (64 MB or more is recommended)
Available disk space: Minimum of 95 MB
Display: Capable of displaying minimum of 640 x 480 pixels
Supported OS: Windows NT 4.0
(*1) ,Windows 2000, Windows XP (x86, x64), Windows Server 2003 (x86, x64) (*2)
Windows Vista (x86, x64), Windows Server 2008 (x86, x64) (*3)
(*1) Service Pack 6 or later, (:2) Standard Edition or Enterprise Edition, (*3) Standard or Enterprise
This completes preparation to use SANUPS SOFTWARE STANDALONE.
For more usage information, refer to the
Install Guide and User Guide
in the CD-ROM of the power
management software.
T i p