Sanyo PLV-55WM1, Руководство пользователя

Страница: 46 / 60

46
Maintenance and Cleaning
RECOMMENDATION
We recommend avoiding dusty / smoky environments when
operating the LCD Projection Monitor. When using under dusty or
smoky conditions, dust may accumulate on the optical elements
inside the LCD Projection Monitor and the screen surface. This
condition may degrade the quality of a projected image.
When the above symptoms are noticed, contact your authorized
dealer or service station for proper cleaning.
Turn off the LCD Projection Monitor and disconnect the AC
power cord from the AC outlet.
1
2
The Air Filter prevents dust from accumulating on the optical elements inside the LCD Projection Monitor. Should the Air
Filter become clogged with dust particles, it will reduce the cooling fans' effectiveness and may result in internal heat
building up and effect on the life of the LCD Projection Monitor.
To clean the Air Filter, follow the cleaning procedures below:
Remove the Air Filter from the Air Filter Holder, and clean the
Air Filter with a brush or a vacuum cleaner.
If the Air Filter is clogged extremely or broken, replace it with a
new one.
3
Fit the Air Filter back in the Air Filter Holder and then replace it
to the LCD Projection Monitor. Make sure that the Air Filter fits
the place where it should be.
4
CAUTION
Do not operate the LCD Projection Monitor with the Air
Filter removed. The dust is stuck in the LCD Projection
Monitor and it may degrade the clear picture reproduction
performance.
Replace the right front cover to the LCD Projection Monitor.
5
Push downward with a forefinger on the Air Filter Holder and
pull the Air Filter Holder off the LCD Projection Monitor.
6
Remove the Right front cover of the LCD Projection Monitor.
a. Hold right upper side of the cover and slightly pull forward.
b. Hold both sides of the cover and remove it.
Right Front Cover
Air Filter Holder
Pull this
part first.
Air Filter Holder
Air Filter
Cleaning the LCD Projection Monitor
Be sure to disconnect the AC Power cord from the AC outlet before
cleaning the LCD Projection Monitor.
●
Gently wipe the screen and the cabinet with a soft dry clean cloth.
●
When it is heavily soiled, wipe the screen and the cabinet with a
soft cloth dampened with warm water and finish with a soft, dry
clean cloth.
CAUTION
DO NOT USE BENZENE, THINNER, OR ANY VOLATILE
SUBSTANCES TO CLEAN THE LCD PROJECTION
MONITOR. THESE CHEMICALS MAY CAUSE DAMAGE TO
THE PRODUCT.
Cleaning the Air Filter