Sanyo PLV-55WM1, Руководство пользователя

Страница: 37 / 60

37
Computer Input
Some computers employ special signal formats which may not be tuned by Multi-scan system of this LCD Projection
Monitor. This LCD Projection Monitor has Manual PC Adjustment to enable you to precisely adjust several parameters to
match those signal formats. The LCD Projection Monitor has 5 independent memory areas to memorize those parameters
manually adjusted. This enables you to recall the setting for a specific computer whenever using it.
Select the PC Adjust Menu with the Point Up / Down button,
and then press the Point Right button to enter the sub-menu.
1
2 Select an item with the Point Up / Down button and press the
Point Left / Right button to adjust each item.
PC Adjust Menu
Adjust an image as necessary to eliminate flicker from the display.
Press the Point Left / Right button to adjust value. (From 0 to 31)
Fine sync
Adjust the number of total dots in one horizontal period. Press the
Point Left / Right button and adjust number to match your PC image.
Total dots
Adjust the horizontal picture position. Press the Point Left / Right
button to adjust the position.
Horizontal
Adjust the vertical picture position. Press the Point Left / Right button
to adjust the position.
Vertical
Press the Point Right button to show the information of the
connected computer.
Current mode
Adjust the clamp level. When the image has dark bars, try this
adjustment. Press the Point Left / Right button to adjust the clamp
level.
Clamp
Shows status
(Stored / Free) of the
selected Mode.
Selected Mode
Computer Adjustment (Manual)
Go on to the next page...
Press the SELECT button or
the Point Up / Down button to
adjust the next item.
Press the MENU button to
return to the previous On-
Screen Menu and store the
adjusted value.
This arrow indicates that there
are other items. Select this
item and press the Point Down
button to go to the next item.
Computer Input