Sanyo CLT-D14, Инструкция по эксплуатации

Страница: 31 / 40

31
REMOTE ACCESS
During message playback:
- “ 4 ” Skip
- “ 5 ” Repeat
- “ 6 ” Rewind (previous message)
- “ 7 ” Delete current message
- “ 9 ” Pause/Resume
- “ 0 ” Stop and return to Remote Access Mode.
2 and then 1 Replay Outgoing Message 1.
During message replay, press “0” to stop
playing and return to Remote Access mode.
2 and then 2 Play Outgoing Message 2 (Announce Only
OGM)
During message replay, press “ 0 ” to stop
playing and return to Remote Access mode.
2 and then 3 Record a new Outgoing Message 1. A beep
tone will be generated to indicate the start of
the recording, You may speak the message
for recording. Press digit “ 0 ” will terminate
the recording and return to the Remote
Access Mode.
2 and then 4 Record a new Outgoing Message 2
(Announce Only message). A beep tone will
be generated to indicate the start of the
recording, You may speak the message for
recording. Press digit “ 0 ” will terminate the
recording and return to the Remote Access
Mode.