III - 28
Service Procedures
SM830063
3
1. Troubleshooting
Never press CL (clear) button unless you want to erase the accessed data in memory. Follow the procedure below only
when erasing is necessary.
❏
To erase accessed data, press the CL button.
❏
When erasing is finished,“----” mark appears on the controller’s display.
After checking the alarm messages, be sure to press the TEST / CHK button.
(E)
Check the remote controller itself for correct operation
The remote controller has a self-diagnostic function to check if it works properly. Use this procedure to find out if the
remote controller itself is in trouble.
a
Turn ON the RCU.CK switch on the back of the P.C.B. Ass’y in the remote controller. See section (A) for exact
location.
b
The appearance of the display will tell you whether or not the remote controller is working correctly or not.
❏
Normal condition – All displays appear for 10 seconds, then disappear.
❏
Unusual condition – All displays flash ON and OFF for 10 seconds, then disappear.
After checking the panel, be sure to set the RCU.CK switch to this original OFF position.
Important
CAUTION
CAUTION