II - 14
2) Remove the tube securing bracket (Figures 2 and 3).
CAUTION
There is also tube-fixing plate on the rear panel side of the unit (Figure 2). Do
not forget to remove that plate.
3) Turn the tension adjustment bolt (counterclockwise), and raise the bracket.
(Figure 4, 19 mm bolt indicated by arrow)
4) Rotate the tension adjustment bolt until the compressor drive belt can be removed, then remove the belt.
Figure 4 Raising bracket
Figure 2 Removing tube fastener (rear side)
Bolts
Bolts
Figure 3 Removing tube fastener
