II - 9
m
Sparkplug coil bracket
Remove the 2 bolts shown in Figure 6, and remove the sparkplug coil bracket.
Figure 5 Removing the wire harness plugs
n
Sparkplugs
Use a sparkplug wrench (16 mm) to remove the sparkplugs (Figure 7).
Figure 7 Removing the sparkplug cover bolts
o
Installation
Install new sparkplugs by following the reverse of the removal procedure (from
l
to
j
).
Sparkplugs
Sparkplug coils bracket : 19.6 - 29.4 N•m
Sparkplug coils bracket
Sparkplug coils bracket : 15.7 - 17.7 N•m
■ Operation check
j
Move the STOP SW to “NORMAL.” (Refer to Section 1. (4) “
l
Canceling Engine Stop.”)
k
Operate the unit, and perform an engine startup check.
l
Reinstall the removed unit panel in its original position.
Figure 6 Removing the sparkplug coils
