II -
o
Replace Element
Slide in the new element as far as it will go. Make sure the seal does not prevent insertion. (Figure 3.)
Figure 3
Caution
● This is a dry element. Do not use oil.
● Replace the element earlier in dusty or oily environments.
p
Fastener attachment
Move the fastener on the air cleaner from the left to the right and secure it in the center using a securing screw.
(Figure 2.)
q
Operation check
1) Move the STOP SW to “NORMAL.” (Refer to Section 1. (4) “
l
Canceling Engine Stop.”)
2) Recheck the air cleaner installation.
3) Operate the engine for 10 - 15 minutes and make sure there are no changes in the revolutions per minute, no
abnormal noises, and no abnormal exhaust smell or color.
