Sanyo 1 852 351 85, Техническое и сервисное руководство

Страница: 79 / 164

Tips for Energy Saving
• Block the air intake and outlet of the unit.
Do not
If they are obstructed, the unit will not work well,
and may be damaged.
• Let direct sunlight into the room. Use sunshades,
blinds or curtains. If the walls and ceiling of the room
are warmed by the sun, it will take longer to cool
the room.
Do
• Always try to keep the air filter clean.
(Refer to “Care and Cleaning”.) A clogged filter will
impair the performance of the unit.
• To prevent conditioned air from escaping, keep
windows, doors and any other openings closed.
Adjusting the Airflow
Direction
1. Horizontal
The horizontal airflow can be adjusted by moving the
vertical vanes with your hands to the left or right.
A. Sweep function
The flap starts moving up
and down to deliver air
over the sweep range.
C. Auto flap function
The flap is set to the recommended
position.
B. Setting the airflow manually
Referring to the above illustration,
use the FLAP button to set the airflow
direction within the range used during the
heating, cooling, or dehumidifying operation.
COOL
DRY
HEAT
FAN
SWEEP
SWEEP
Knob
When the humidity is high, the vertical vanes
should be in the front position during the cooling
or dehumidifying operation. If the vertical vanes are
positioned all of the way to the right or left,
vent and drip down.may begin to form around
condensation may begin to form around the air
the air vent and drip down.
2. Vertical
The vertical airflow can be adjusted by moving the flap
with the remote control unit. Do not move the flap with
your hands. Confirm that the remote control unit has
been turned on. Use the FLAP button to set either
the sweep function or one of the six airflow direction
settings.
CAUTION
2. Combining the 1-Hour OFF Timer and
12-Hour ON Timer
By combining the 1-Hour OFF Timer and 12-Hour ON
Timer, it is possible to have the unit operate for just
one hour from the present time, and then have it
switch on again later at a time specified by you.
(Example) Having the unit operate for just one hour
from the present time, and then switch on
again three hours from the present time.
Setting procedure:
• Set the 1-Hour OFF Timer and the 12-Hour ON
Timer simultaneously.
Unless you set the 1-Hour OFF Timer and the
12-Hour ON Timer at the same time, the
1-Hour OFF Timer may operate for one hour
or more.
STEP 1 Press the 1 HR. TIMER button.
STEP 2 Press the TIMER ON button. Then press it
again to set the unit to turn on three hours
later.
Timer setting
Operate
Stop Operate
1 hour 2 hours
3 hours
NOTE
13