Sanyo 1 852 351 85, Техническое и сервисное руководство

Страница: 78 / 164

3. ON/OFF Program Timer
A combination of the TIMER ON and TIMER OFF
modes, this function allows you to specify the time that
the unit turns on and the time when it turns off.
(Example) The unit will turn on three hours from now,
and turn off five hours from now.
TIMER ON display
during counting
TIMER OFF display
during counting
after 3 hours
has elapsed
Timer setting
Stop
3 hours
5 hours
2 hours
Operate
Setting procedure:
STEP 1
Use the procedure described in the
‘‘1. TIMER ON mode’’ section on the pre-
ceding page to set the timer to turn the unit
on three hours
STEP 2
Use the procedure described in the
‘‘2. TIMER OFF mode’’ section on the pre-
ceding page to set the timer to turn the unit
off five hours.
• The display changes immediately to its status
previous to timer setting,
but the
or indication remains.
• Press the TIMER ON button or the TIMER OFF button
to display the time remaining on the timer in seconds.
• Note that it is not possible to check both the ON
and OFF timer settings. The timer setting that will
occur first is given preference and displayed.
Cancellation procedure: Press the CANCEL button.
Cancellation procedure:
Press the ON/OFF operation button to turn the unit off,
wait for the unit to stop operating, and then press the
ON/OFF operation button again. The 1-Hour Timer function
is now cancelled and the unit operates normally.
NOTE
• If, while the 1-Hour Timer function is operating,
the 1HR. TIMER button is pressed once to cancel
the function and then again, the unit continues to operate
for one hour from that point in time and then stops.
• It is not possible to use the OFF Timer and 1-Hour OFF
Timer together. Whichever function is set last takes
precedence. If the 1 HR. TIMER button is pressed
while the TIMER OFF function operates, the OFF Timer is
cancelled and the unit will stop operating one hour later.
• Do not use the 1-Hour OFF Timer when both
If the 1-Hour OFF Timer has been set, press the
TIMER ON and TIMER OFF are set simultaneously.
TIMER OFF button, then the CANCEL button to
operate both the 1-HourOFF Timer and ON Timer
simultaneously.
12
Using the 1-Hour
OFF Timer
1. 1-Hour OFF Timer
This function causes the unit to operate for
one hour and then stop, regardless of whether
the unit is on or off when this button is pressed.
The indicator in the display indicates that
this function is operating.
Setting procedure:
Regardless of whether the unit is operating or stopped,
press the 1 HR. TIMER button.
appears in the display.
2. TIMER OFF mode (Example)
The timer times appear
in the display
for only 3 seconds.
STEP 1
STEP 2
After the length of time set for TIMER OFF elapses,
the unit stops operating.
The display depicted above indicates that the air
conditioner will stop operating in five hours.
Setting procedure:
• The display changes immediately to its status previous
to timer setting, but the indication remains.
• To check the status of the timer while it is counting
down, press the TIMER OFF button again.
Cancellation procedure: Press the CANCEL button.
STEP 1
Press the TIMER OFF button.
STEP 2
Press the TIMER OFF button (which
advances the time displayed) to set the time
at which you want operation to stop.
The time can be set for one to twelve hours,
in one hour steps.
1 2 3.......12