SANY SY75 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 224

SANY SY75 Скачать руководство пользователя страница 16

Your Documentation Package

SY75C Excavator OMM

1-4

Operation and Maintenance Manual — 0220

SANY

YOUR DOCUMENTATION PACKAGE

This documentation applies only to this machine and should not be used with any other machine. The
documentation for this machine includes the following items:

Operation and Maintenance Manual

A copy of this Operation and Maintenance manual must always remain in the operator cab (a) at all times.

A copy of this manual should be made available to maintenance personnel when maintaining the machine.

Parts Manual

The Parts Manual consists of parts lists and matching drawings used for ordering spare parts as needed. The Parts
Manual is best left in the workshop area or office. It should be available to the maintenance and service personnel.

Maintenance Log

The Maintenance Log lists regularly scheduled maintenance to be performed by the operator or maintenance
personnel. All maintenance performed upon the machine must be recorded in the Maintenance Log.

«
...
14
15
16
17
18
...
»

Содержание SY75

































































































































































































































Отзывы:

Нет отзывов