Sanwa MT-R RX-493i, Руководство пользователя

Страница: 16 / 31

30 29
How to Use Each Feature
How to Use Each Feature
How to Use Each Feature
Sw1
Sw3
Sw2
Trm2
Trm1
Trm3
Switch 3
(SW3)
STEP Setting
Shortcut for Key Assign
ENTER BACK
Operation Position
AUX1 Setting AUX2 Setting
Switch CH to SET with up and down key.
Select CH with enter.
Sw1
Sw3
Sw2
Trm2
Trm1
Trm3
Switch 3
(SW3)
Shortcut for Key Assign
Switch Type
Trim 3
(TRM 3)
ENTER BACK
Switch CH to SET with up and down key.
Select SET with enter.
AUX
AUX
STEP AUX
POINT AUX
● AUX menu sets the performance of AUX1 and AUX2 (3ch, 4ch). You can choose from STEP AUX (STEP),
POINT AUX (POINT), 4WS (4-Wheel Steering: Coordinate Phase, Opposite Phase). MOA (Motor On
Axle), AUX-MIX (AUX Mixing: ST → AUX/TH-AUX) and CODE-AUX.
● Setting Step AUX allows you to set the operating quantity by operating assigned Trim or a switch.
● By factory default, the AUX feature is set to the Step AUX.
1) Select [AUX] with up and down key.
2) Determine with enter operation.
It will change to CH Setting menu.
3) Setting Step AUX (STEP AUX)
Determine [CH] to activate with the enter.
Set the position of the motion with up and down key.
*Operating range also can be set by
EPA (End Point Adjustment, P.24).
○ Setting Range: H100% ～ L100%
○ Default: 0%
4) Mode Setting (MODE)
Determine with enter, and set working step values
to the used method.
○ Setting Range: 1/2/5/10/20/25/50/100
○ Default: 5
SET can be AUX TYPE and MODE setting and
shortcut of the key assign function.
*Assign the features to Trim and switch with
Key Assignments according to the used method.
● By setting Point AUX and assigning the movement of AUX1/AUX2 (3ch, 4ch) to the
switch and Trim, you can move the servo to Point1, Point2, and Point3 position.
The Point that moved can be set with EPA (End Point Adjustment). Adjust the Point position according to
the usage.
*Point number is 3 point cannot change.
1) Select [AUX] with up and down key.
2) Change [SET] menu with enter.
*Switch CH to SET with up and down key.
3) Type Setting (POINT)
Select [POINT] on AUX TYPE with up and down key.
4) Point and setting values
Select A1 or A2 you want to set and enter.
Select 1, 2, or 3 you want to set and enter.
Set values with up and down key.
*AUX1 and AUX2 can be set AUX TYPE separately.
*Operating range also can be set by
EPA (End Point Adjustment, P.24).
*Assign on SW3 or trim according to the used method.