SANUP TPR 3E PLUS, Руководство пользователя, Страница: 16 / 19

16
5.3 Remote Controller RC-1000
All remote controller functions are almost same with main unit controller function
except below.
1) Reset key function from front panel
2) Fixed interface parameters: Address; 1, Speed; 9600 BPS, Delay Time; 1
Figure 6. Front of Remote Controller
Table 4. Remote Controller Parameter List
No. Symbol Setting Data Range Operation PASS
0 - Indicating
Changeable display of
input signal or load
current by [ENT] key.
1
PASS number
None
2
Output limit high
0~100%
Disable when
connected external
VR.
3
Load current limit
high
5~240A
4
Soft start time
1~250 sec.
If set to ‘0’ stop the
function.
5