13
3) Manual control by external V.R
Output power will be control by turn angle of output limit V.R or output limit
parameter (Symbol: OUt).
Figure 4. Wiring for non-control input signal
4) RS 485 Interface (Optional)
TPR-3E PLUS will be control by RS-485 interface signals.
Apply power to the TPR-3EPLUS and go to parameter (Symbol: Smd). Set up the
control signal input (Symbol: COm). Refer to the TPR-3E PLUS interface manual for
instructions on using interface.
Note) If control signal input selected interface, current signal control will be
disable.