Santint Perfitall 10 Series, Руководство пользователя

Страница: 9 / 18

Santint
PA Series Paint Mixing Machine V1.1
7
7) Bottom Cover and Bottom Plate
Use M6X12 screws to install the bottom cover into the four holes of the left side plate.
（
5.2.18
）
Hang the bottom plate on the bottom cover and the hanging shaft of the right side plate.
（
5.2.19
）
8) Link Rod Assembly and Big/Small Can Cover
Get the supportive units into the link rod assembly
（
5.2.20
），
Fasten them on the 5X24 spring pin
of the vertical driving shaft. The other end shall be insert into the shelve assembly shaft
（
5.2.21
）
.
Open the big/small can covers and keep them cover the link rod assembly, then fasten
them(5.2.22). The length of the link rod shall be in line with the spans. Cover the shelve
supportive units and the end caps on the top shelf.
（
5.2.23
）
. Install the other link rods and cover
plates with the same methods. Cover the supportive units and sealing pads on the top of the main
drive.
5.2.18 5.2.19
Bottom Cover
5.2.20
5.2.21
5.2.22 5.2.23
Plastic Cover
Supportive Units