Santint
PA Series Paint Mixing Machine V1.1
3
5.2 Setup Process
1) Unpack The Package
Remove the overall binding band and the
package accessories. Take out the
double-shelves/tri-shelves
assembly.
Remove the plastic film. Use the attached
inner hexagon spanner to remove the
fixing plate and the inner hexagon screws
(5.2.1). Keep the hexagon screws for
future usage. The fixing plate is only for
package.
2) Side Plate
Rotate four hanging shafts into the threaded holes of the right side plate (5.2.2). Use two M8X20
bolts to fix the left side plate on the power assembly (5.2.3). Use two M8X20 bolts to fix the right
side plate on the right mudsill (5.2.4). The finished position is shown in 5.2.5. Notes: The power
assembly and the right mudsill shall be located in the predefined position or leaned on the wall.
The mixing machine needs no relocation after installation.
3)Bottom Shelves Assembly
Put one end of the bottom plate on the power assembly; put its other end on the right side
plate(5.2.6). Fasten two M8X20 screws respectively on the two ends of the bottom shelve
assembly
（
5.2.7
）
. Insert the screws on the left of the bottom shelves assembly into the hole of the
bottom plate of the side plate
（
5.2.8
）
. Repeat it for the right end.(5.2.9)
5.2.4
Right Side Plate
Right
Mudsill
5.2.5
5.2.1
Fixing Plate
Hanging Shaft
Right Side Plate
Left Side Plate
Power
Assembly
5.2.2
5.2.3
