Santint
PA Series Paint Mixing Machine V1.1
10
5.3.3 Back-storing Shelf and Mica Shelf
1.
Put the supportive units of the back-storing shelf beside the motor
（
5.3.9
），
use two
M6X12 screws to hang the back-storing shelf onto the holes of the left side plate
（
5.3.10
）
. The surfaces of the back-storing supportive plates level with the relevant
shelves. Install all the back-storing shelves in the same way.
（
The left/right supportive
units with turn buckles shall be leveled with the shelf at the 6
th
layer
）（
5.3.11
）
.
2.
Insert the two bulging ends of the back-storing shelves into the slots of the back-storing
supportive plates. The short one shall be hung on the supportive units of the back-storing
shelf.
（
5.3.12
）
3.
Connect one end of the pulling strip with the back-storing shelf supportive unit of the 3
rd
layer. The other end shall be connected with the turn buckle
（
5.3.13
）
. Fix the supportive
units with the back-storing shelves via M6X12 screws. Turn the buckle and tension the
pulling strip.
（
5.3.14
）
4.
Connect the mica mount and the mica shelf by M8X50 screws. Do not fasten the screws
（
5.3.15
），
then fix them onto the relevant position of the right side plate.
（
5.3.16
）
5.
Fasten all the screws.
Right
Hanging
Plate
5.3.7
5.3.8
5.3.9
5.3.10
