Sansui BDP3959, Руководство пользователя

Страница: 47 / 75

47
Please press Ok to reset player with default Settings
Cancel Ok
Reset Settings
5.6.6 Reset Settings
This setup menu selection will allow you to return all setup menu choices to the factory default settings.
NOTE : This will also reset the Parental Password back to the factory default, if it was changed
To return to the factory default settings, from the Setup menu, press the right arrow key( ). Then, use the
up/down arrow keys( ), if necessary, until “Reset Settings” is highlighted, as shown below:
Press the ENTER key. The following screen will appear:
Use the arrow keys to choose “Ok”, then press the ENTER key. Once you press “Ok”, all previously-
changed settings from other menus will go back to the original factory settings.
ETHERNET
Network
5.7 CONFIGURING THE NETWORK CONNECTION – WIRED CONNECTION
In order to access BD-Live content the BD player must be connected to the ethernet via the RJ-45
ethernet connector on the rear of the player, The RJ-45 connector is on the back of the BD player,
and looks like this:
This section describes how to configure the BD-player for accessing the internet via the RJ-45 connector
shown above.
To set up the BD player’s Ethernet, from the Setup menu, use the arrow keys( ) to highlight the
Network
menu: