Sansaire Sous Vide, Инструкция по эксплуатации

Страница: 6 / 67

10 11
ENGLISH
PLEASE SAVE THIS MANUAL FOR RECIPES AND TECHNIQUES, VISIT SANSAIRE.COM
Features
7. Pump Outlet : The circulator moves water through
the pump outlet to keep the water bath at an even
temperature.
8. Power Cord Plug
9. Reset : For safety, the machine enters reset mode if
water level is too low.
10. Clamp : The clamp attaches the machine to the wall
of a water container.
11. Back Cover : Detatches for easy access to heating
element for cleaning. Always operate with the cover
attached.
12. Impeller Cover : Detatches for easy access to
impeller for cleaning. Always operate with the cover
attached.
1. Temperature Ring: Turning the ring sets the target
temperature of your water bath.
2. Target Temperature Button : Used to show
temporarily the target temperature on the display.
3. Power Button : Used to turn the circulator on
and off. When on, heating and circulating begins
immediately.
4. C/F Button: Switches between Celsius and
Fahrenheit units on the display.
5. Display: During normal operation, the display
shows the current temperature of the water bath.
When you turn the temperature ring, the display
temporarily shows target temperature.
6. Minimum Fill/Maximum Fill : These lines indicate
the minimum and maximum fill levels for the water
bath. Never operate the Sansaire if the water level
is outside of these boundaries, as it may cause
damage to the unit.
1
5
6
7
2 3 4
8
9
10
11
12