![background image](http://html1.mh-extra.com/html/sanosil/q-jet-c10/q-jet-c10_operating-manual_809359014.webp)
Sanosil Q-Jet C10
Operating Manual
Des M03
–
operating manual Q-Jet C10
14/20
8.
Prepare the device for operation
Before filling (or emptying) the tank always turn OFF the device and disconnect the
power supply plug!
8.1. Filling
•
Wear some protection materials for eyes and skin
•
Remove tank bottle
•
Open the tank bottle by unscrewing the connector
•
Fill up to 850 ml Sanosil Disinfectant into the tank bottle
•
Close the tank bottle by screwing on the connector
•
Put the full tank back into the device and connect it to the intake manifold.
Attached when it clicks.
•
Wipe-up any spills with a microfiber towel or rag
CAUTION
Risk of Injuries!
Always wear gloves and safety googles when filling the bottle!
Do not overfill bottle or spill around Sanosil Disinfectants!
8.2. Power Connection and Switch on the device
•
Before making electrical connections carefully check that the voltage supplied is
compatible with the voltage marked on the data plate.
•
Insert power cord in IEC power socket.
•
Tip ON/OFF to switch on the device