Sanosil Q-Jet C10
Operating Manual
Des M03
–
operating manual Q-Jet C10
8/20
3.7.
Important safety Directions (Read carefully before use)
Caution (Sanosil Q-JET device)
1.
When the Q-Jet has completed its dispensing cycle, the room will be full of atomized Sanosil Dis-
infectant. The treated room MUST REMAIN UNOCCUPIED FOR AT LEAST 120 MINUTES AFTER
FOGGING. 120 minutes is the minimum wait time and means not that the room is safe to re-enter
or reoccupy. Length of wait time increases with fogging quantity (ml/m
3
).
2.
When room re-entry is required before treatment process is completed or to perform a H
2
O
2
level
check , proper personal equipment (PPE) including wraparound style goggles; respirator mask (filter
class ABE1) filtering hydrogen peroxide (for example: 3M 4277 or 3M 7500 mask with 6057 filter)
and gloves should be worn to safely enter the room.
Caution (atomized Sanosil Disinfectant):
A caution statement in this manual identifies a condition or practice, which if not corrected or discontin-
ued immediately, could lead to serious injury or death.
1.
KEEP OUT OF REACH FOR CHILDREN.
2.
Carefully read all instructions, warning, caution and first aid statements prior to use.
4.
Use only as directed.
5.
The device is designed for easy-use. However, only properly trained individuals should use this de-
vice.
6.
Do not leave the device unattended between uses.
7.
Electric shock hazard. Do not plug in if electrical plug or parts are wet.
8.
Use only a Sanosil supplied electrical power cord.
9.
Take care to prevent water or other fluid from entering the device. Should this occur, allow to com-
pletely dry before use. Check the accuracy of all operating functions.
10.
Always unplug the power cord from the outlet before moving the device.
11.
There are no user-serviceable parts inside the device other than the nozzle. An operator may only
perform maintenance procedures specifically described in this manual, all other repairs should be
made by the manufacturer.
12.
Position the device on a secure surface to prevent rolling or moving while in use.
13.
Do not tip the device on its side at any time unless completely empty and dry.
as this can cause leakage and damage on electrical parts
14.
Do not overfill the tank as this can cause leakage and damage on electrical parts
15.
Protect this device from severe impact and shock.
16.
While in use, the body of the device may become warm to the touch. Handle with caution.
17.
Read the specific warning and caution statements of the Sanosil disinfectant you use.
18.
To ensure effectiveness and safety, use
only
with Sanosil disinfectant. Using any other manufac-
turer’s disinfecting or cleaning product will result in serious injury, exposure and environmental
damage.
19.
Sanosil Ltd. is not responsible for any injury or damage caused by using this device outside of the
specific parameters detailed in this manual.
20.
Store in a safe, dry location. Do no place anything on top of the device. Store in an upright position.