SANJIANG SEC1000, Инструкция по установке и наладке

Страница: 4 / 26

SEC1000 FIRE ALARM CONTROL PANEL
Page
3
of 24
Recommended type of cable Plain unscreened cable, 1.5mm 2
Cable diameter 1mm 2 ~ 2.5mm 2
Transmission distance ≤1500m
FAULT OUT
(COM, NO)
Contact capacity 30VDC@2A, 125VAC@0.5A
Recommended type of cable Plain unscreened cable, 1.5mm 2
Cable diameter 1mm 2 ~ 2.5mm 2
24VK (+, -)
Output voltage 20 ~ 28VDC
Max. output current 500mA, 1A S.C.Out+24VK in total
Recommended type of cable Plain unscreened cable, 1.5mm 2
Cable diameter 1mm 2 ~ 2.5mm 2
Loop
LOOP OUT (+, -)
LOOP IN (+, -)
Output voltage 18.5 ~ 28VDC, pulse
Max. output current 500mA
Loop type Class A and Class B
Recommended type of cable Unscreened twisted-pair, 1.5mm 2
Max. Loop length 2000m
Cable diameter 1mm 2 ~ 2.5mm 2
Network communication
RS-485
Transmission rate 9600 bps
Recommended type of cable Unscreened twisted-pair, 1mm 2
Transmission distance ≤1000m
Cable diameter 1mm 2 ~2.5mm 2
CAN
Max. number of panels 20
Transmission rate Optional: 10K, 20K, 50K and 100K bps
Recommended type of cable Unscreened twisted-pair, 1mm 2
Transmission distance ≤1000m
Cable diameter 1mm
2
~ 2.5mm
2
Physical dimensions
Approx. Dimensions of the panel (W×H×D) 400×360×104mm
Approx. weight (without battery) 3.7kg
Operating conditions
Temperature range: -5°C~ 45°C; Max relative humidity: 95% (40°C ± 2°C, no condensation)
3. Installation and Connections
The panel is supplied with a plastic detachable exterior door and front panel for operation and
display, a mental back box and functional PCBs. Space is available inside the panel for the
rated capacity of VRLA backup batteries, an optional communication board if applicable.
3.1 Panel’s interior
The interior can be accessed by the key of the front panel provided.