SANJIANG SEC1000, Инструкция по установке и наладке

Страница: 20 / 26

SEC1000 FIRE ALARM CONTROL PANEL
Page
19
of 24
When the time counted is over, the loop learn fails and it prompts timeout error.
Save data to U-disk
This function will copy the file of system configuration to the U-disk you insert at the top right
USB port of the front panel.
Note
: Choose a U-disk of capacity within 32G and make sure its file system is FAT32 or FAT16,
otherwise format it on computer. The remaining capacity of the U-disk should be above 2M for data
backup
.
Take the prompt as reference:
Load data from U-disk
This function will load the configuration file from U-disk to the panel’s flash and overwrite the
panel’s existing data. So this function must be used with care.
File reset
This function allows you to clear the panel’s memory back to its factory default settings. It is
such a vital operation that only authorized user of level 3 could operate and you should make
sure that you are willing to do so. Better to follow its tips:
When it completes, restart the panel
to take the newly loaded data into
effect.
Press ‘Yes’ to start copy. The process
might take about 30-60s and other
function will be suspended.