Single Bather Spa Baths
SIGNATURE AND DESIGNER “ELITE” 2-ZONE COMMAND PAD
07
9) Pre-Programmed Massage Modes:
All 400 Series models have two pre-programmed massage
modes: RANDOM and AEROBIC.
RANDOM Massage Button:
Causes the jet pairs to alternate between pulse and
constant flow.
AEROBIC Massage Button:
Activates a slowly changing massage that increases
the water flow from LOW to HIGH and then decreases
the water flow from HIGH to LOW.
10) Personal Memory Mode:
The Personal Memory mode allows you to store and recall
the settings of the command pad via a single button (the
state of the mood light is not included). All 4-Jet models
can store and recall a personalized memory setting via the
Memory button.
MEMORY Button:
To store your MEMORY setting, press and hold the
MEMORY button until the MEMORY LED Indicator
turns ON to acknowledge the setting has been stored.
To recall the MEMORY setting, press the MEMORY
button for less than 1 second.
4-JET COMMAND PAD:
COMMAND PAD FUNCTIONS:
1) STANDBY Mode LED Indicator:
Indicates the system is ready to operate.
2) OFF Button:
Turns the jets OFF and returns the system to STANDBY.
3) LIGHT Button:
Used to turn the optional mood light ON and OFF. Once
the mood light is ON, the system will automatically turn it
OFF after 2 hrs.
4) Display:
Displays the time remaining for system operation (the timer
counts down from 20 minutes and is reset when leaving
the STANDBY Mode).
5) ALL JETS Button:
Simultaneously controls all jet pairs at either HI or LO
speed.
6) FOOT and BACK Buttons:
Used to individually control the water flow of the FOOT
and BACK jets. Each jet pair can be set at either HI or LO
speed or turned OFF. When either of the buttons is
pressed for longer than 1.0 second, the system will
automatically increase or decrease the water flow of the
selected jet pair.
7) JET FLOW LED INDICATORS:
Displays the water flow of the FOOT and BACK jets.
8) PULSE Button:
Pulsates the water flow and simultaneously allows
individual jet pair control via the FOOT and BACK buttons.
This function allows all jets or either pair to pulse, while
the non-pulsing jet pair can be set at HI or LO speed or
turned OFF.
1
2
3
4
5
6
7
8
9
1 0
8
1
STanDBY Mode LED Indicator
Indicates the system is ready
to operate.
2
OFF Button
Turns the jets OFF and returns the system to STANDBY.
3
LIgHT Button
Used to control the optional mood light.
• Press the “Light” button to turn on the mood light
• The light displays 7 vivid colors and 2 sequencing settings.
• To change the light color, press the “Light” button to turn it off
and after one second press it again to turn it on.
• The color sequence is as follows: Bright White, Aqua Blue,
Soothing Blue, Ocean Blue, Majestic Gold, Shamrock Green, Fiery
Red, Chameleon Mode, Party Mode
• In the event that the light is left turned on, it will automatically
turn off after 2 hours continuous operation.
4
Display
Displays the time remaining for system operation (the
timer counts down from 20 minutes and is reset when leaving the
STANDBY Mode).
5
aLL jETS Button
Simultaneously controls all jet pairs at either
High or Low speed.
6
FOOT anD BaCk Buttons
Used to individually control the water
flow of the jets. Each jet pair can be set at either High or Low
speed or turned OFF. When either of the buttons is pressed for
less than one second, the system will automatically increase or
decrease the water flow of the selected jet pair.
7
jet Flow LED Indicators
Displays the water flow of the Foot and
Back jets.
8
PULSE Button
Pulsates the water flow and simultaneously allows
individual jet pair control via the FOOT and BACK buttons. This
function allows all jets or either pair to pulse, while the non-pulsing
jet pair can be set at High or Low speed or turned OFF.
9
Pre-Programmed Massage Modes
All two-zone models have two
pre-programmed massage modes: RANDOM and AEROBIC.
RanDOM
Massage Button: Creates water pulses in patterns of
limitless variation.
aEROBIC
Massage Button: Activates a slowly changing massage
that increases the water flow from LOW to HIGH and then
decreases the water flow from HIGH to LOW.
10
Personal Memory Modes
The Personal Memory mode allows you
to store and recall the settings of the command pad via a single
button (the state of the mood light is not included). All control
models can store and recall a personalized memory setting via the
Memory button.
MEMORY Button
To store your MEMORY setting, press and hold
the MEMORY button until the MEMORY LED Indicator turns ON to
acknowledge the setting has been stored. To recall the MEMORY setting,
press the MEMORY button for less than 1 second.
