
COMe-cWL6 – User Guide Rev. 1.4
// 50
Table 45: General Signal Description
Type
Description
Type
Description
NC
Not Connected (on this product)
O-1,8
1.8 V Output
I/O-3,3
Bi-directional 3.3 V I/O-Signal
O-3,3
3.3 V Output
I/O-5T
Bi-dir. 3.3 V I/O (5 V Tolerance)
O-5
5 V Output
I/O-5
Bi-directional 5V I/O-Signal
DP-I/O
Differential Pair Input/Output
I-3,3
3.3 V Input
DP-I
Differential Pair Input
I/OD
Bi-directional Input/Output Open
Drain
DP-O
Differential Pair Output
I-5T
3.3 V Input (5 V tolerance)
PU
Pull-Up Resistor
OA
Output Analog
PWR
Power Connection
OD
Output Open Drain
+ and -
Differential Pair
To protect external power lines of peripheral devices, make sure that: the wires have the
right diameter to withstand the maximum available current.
The enclosure of the peripheral device fulfills the fire-protection requirements of
IEC/EN60950.
8.2.
X1A and X1B Pin Assignment
For more information regarding the pin assignment of connector X1A (Row A and Row B) and connector X1B (Row C
and Row D), see the pin assignment tables:
1.
Table 46: Connector X1A Row A Pin Assignment (A1- A110)
2.
Table 47: Connector X1A Row B Pin Assignment (B1-B110)
3.
Table 48: Connector X1B Row C Pin Assignment (C1-C110)
4.
Table 49: Connector X1B Row D Pin Assignment (D1-D110)