S&T 36028-0000-16-5 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 88

S&T 36028-0000-16-5 Скачать руководство пользователя страница 40

COMe-cWL6 – User Guide Rev. 1.4

www.kontron.com

// 40

5/

Environmental Specification

The COMe-cWL6 complies with the following standards and certifications. For more information, contact Kontron
Support.

Table 40: Standards and Certification Compliance

Standard

Definition

Operating
Temperature

0°C to 60°C (for COMe-cWL6 variants)
-25°C to 75°C (by qualification for COMe-cWL6 E1 variants)
-40°C to 85°C (by design for COMe-cWL6 E2 variants)
(PCB and components should selected and designed accordingly)

Storage
Temperature

-30°C to 85°C (for COMe- cWL6 (E1) variants)
-40°C to 85°C (for COMe- cWL6 E2 variants)

Humidity

93% relative Humidity at 40°C, non-condensing (acc. to IEC 60068-2-78)

Emission (EMC)

According to EN55022 (Class B), EN61000-6-2 and
EN61000-6-4

Immunity (EMI)

IEC/EN 61000-6-2: Electromagnetic compatibility (EMC) – Part 6-2: Generic standards -
immunity for industrial environments

Immunity tests:
IEC/EN 61000-4-2 - Electrostatic discharge immunity (ESD)
IEC/EN 61000-4-3 – Radiated, radio frequency, electromagnetic field immunity
IEC/EN 61000-4-4 - Electrical fast transient/burst immunity
IEC/EN 61000-4-5 - Surge immunity
IEC/EN 61000-4-6 - Immunity to conducted disturbances, induced by radio frequency
fields
IEC/EN 61000-4-8 - Power frequency magnetic field Immunity
IEC/EN 61000-4-11 - Voltage dips, short interruptions, & voltage variation immunity

Safety/CE

EN 62368-1:2014 Safety for audio/video and information technology equipment

UL

UL 60950-1/CSA 60950-1 Component Recognition
Recognized by Underwriters Laboratories Inc. Representative samples of this
component have been evaluated by UL and meet applicable UL requirements.
UL listings:
AZOT2.E147705
AZOT8.E147705

WEEE

WEEE compliant (Directive 2012/19/EU)

REACH

REACH compliant (Regulation (EC) No 1907/2006)

Shock

IEC/EN 60068-2-27
Non-operating shock – (half-sinusoidal, 11 ms, 15 g)

Vibration

IEC/EN 60068-2-6
Non-operating vibration – (sinusoidal, 10 Hz – 4000 Hz, +/- 0.15 mm, 2 g)

Theoretical MTBF
[hours]

COMe-cWL6 i7-8665UE: 565206 h @ 40°C
COMe-cWL6 E2S i3-8145UE: 620436 h @ 40°C

RoHS II

Compliant with the directive on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.

«
...
38
39
40
41
42
...
»

Содержание 36028-0000-16-5

























































































Отзывы:

Нет отзывов