Sanden Vendo Vue SXY 30, Руководство пользователя

Страница: 55 / 128

P-23
Part #1167879 08/2008
9. Advance on Button 2 to desired setting
10. Press Button 4 to save – :00 begins flashing (minutes)
11. Advance on Button 2 to desired setting
12. Press Button 4 to save setting – Start 1 or 2 and hh:mm you programmed will display
13. Press Button 1 - Start Time 1or 2
14. Press Button 2 to advance to Stop Time 1or 2
15. Press Button 4 – Stop Day 1 or 2
16. Press Button 4 – Stop Day 1 or 2 – Mon-Sun-everyday Off/On
17. Repeat above steps for Stop Time 1or 2
Refrigeration:
If ‘Timing Features’ in Configuration Mode are ‘Off’, you will only have access to the following
features:
Set point
Sensor Reading
Degree X – Celsius or Fahrenheit
Fan Default
Periodic Defrost – On/Off
When Timing Features is set on in Configuration, you can raise the cabinet temperature 18 °F/
4°C twice during a 24 hour period for energy conservation.
Refrigeration:
1. Press Button 1 to exit until you see main menu
2. Press Button 2 to scroll until “Refrigeration” is displayed
3. Enter on Button 4
4. Enter on Button 4 – ‘Set Point’
5. Enter on Button 4 – current ‘Set Point’ will display – (Factory setting is 36°F/2°C)
6. Press Button 4 – current temperature will flash
7. Press Button 2 or 3 to scroll through the following settings:
Temperature setting 32 33 34 35 36 37 38 39 40
Cut-in Temperature (F) 34 35 36 37 38 39 40 41 42
Cut-out Temperature (F) 31 32 33 34 35 36 37 38 39
Nominal Temperature (F) 32 33 34 35 36 37 38 39 40
Nominal Temperature © 0 0.5 1 1.5 2 2.5 3 3.5 4
5. Press Button 4 to ‘save’ desired setting
7. Press Button 1 to exit – Set Point
8. Advance on Button 2 – Sensor Reading
9. Press Button 4 – Current reading in either F/C will display – must be set as Ref in
Configuration first.
10. Press Button 1 – Sensor Reading