Sanden Vendo Vue SXY 30, Руководство пользователя

Страница: 36 / 128

P-4
Part #1167879 08/2008
Tube Fill:
The changer coin tubes can be filled via the external coin insert plate or the acceptor part of the
changer. This mode enables the Control Board to keep an accurate count of the coins.
1. Press Button 2 to scroll until “Tube Fill” is displayed.
2. Press Button 4 to Enter.
3. Insert coins through either the coin insert slot or acceptor part of the changer. The
controller will display the ‘value’ and quantity of coins in the changer tubes.
4. Exit on Button 1.
Test Mode:
1. Press Button 2 to scroll until “Test Mode” is displayed.
2. Press Button 4 to Enter.
Test Mode Vending:
(Only for machines with a lot code of 08074T or earlier)
Up to twenty products can be vended in this mode.
1. Still in Test Mode, Press Button 2 to scroll until “Vending” is displayed.
*2. Press Button 4 – Display will read ‘Close Door to Vend’.
3. Close outer door.
4. Display will read ‘Test Mode - Enter Selection’.
*5. Press 1 to vend a selection. The vendor will sequence through its Test Space to Sales
Configuration as shown in the Figure.
Drink Location for Test Vend:
SXY40, 5 Shelves SXY40, 6 Shelves